Altering bio-oil composition by catalytic treatment of pinewood pyrolysis vapors over zeolites using an auger - packed bed integrated reactor system

Guda, Vamshi Krishna; Toghiani, Hossein

doi:10.18331/BRJ2016.3.3.4

Altering bio-oil composition by catalytic treatment of pinewood pyrolysis vapors over zeolites using an auger - packed bed integrated reactor system

Document Type : Research Paper

Authors

Dave C. Swalm School of Chemical Engineering, Mississippi State University, Mississippi State, MS 39762, USA.

10.18331/BRJ2016.3.3.4

Abstract

Pine wood pyrolysis vapors were catalytically treated using zeolite catalysts. An auger fed reactor was used for the pine wood pyrolysis while a packed bed reactor mounted on the top of the auger reactor housed the catalyst for the treatment of pine wood pyrolytic vapors. The pyrolytic vapors produced at 450 ^oC were passed through zeolite catalysts maintained at 425 ^oC at a weight hourly space velocity (WHSV) of 12 h^-1. Five zeolites, including ZSM-5, mordenite, ferrierite, zeolite-Y, and zeolite-beta (all in H form), were used to study the effect of catalyst properties such as acidity, pore size, and pore structure on catalytic cracking of pine wood pyrolysis vapors. Product bio-oils were analyzed for their chemical composition (GC-MS), water content, density, viscosity, acid value, pH, and elemental compositions. Thermogravimetric analysis (TGA) was performed to analyze the extent of coking on zeolite catalysts. Application of catalysis to biomass pyrolysis increased gas product yields at the expense of bio-oil yields. While all the zeolites deoxygenated the pyrolysis vapors, ZSM-5 was found to be most effective. The ZSM-5 catalyzed bio-oil, rich in phenolics and aromatic hydrocarbons, was less viscous, had relatively lower acid number and high pH, and possessed oxygen content nearly half that of un-catalyzed bio-oil. Brønsted acidity, pore size, and shape-selective catalysis of ZSM-5 catalyst proved to be the determining factors for its activity. TGA results implied that the pore size of catalysts highly influenced coking reactions. Regeneration of the used catalysts was successfully completed at 700 ^oC.

Graphical Abstract

Highlights

An integrated reactor system is reported for catalytic pyrolysis of pinewood.

Five zeolites with different acidity values, pore sizes, and pore structures were studied.

Bio-oil composition was a function of catalyst’s surface area and pore properties.

ZSM-5 in H form, with its shape-selective catalysis, produced best quality bio-oil.

Keywords

References

[1] Adler, P.R., Grosso, S.J.D, Parton, W.J., 2007. Life-cycle assessment of net greenhouse-gas flux for bioenergy cropping systems. Ecol. Appl. 17(3), 675-691.

[2] Adam, J., Blazsó, M., Mészáros, E., Stöcker, M., Nilsen, M.H., Bouzga, A., Hustad, J.E., Grønli, M., Øye. G., 2005. Pyrolysis of biomass in the presence of Al-MCM-41 type catalysts. Fuel. 84(12-13), 1494-1502.

[3] Aguado, R., Olazar, M., San José, M.J., Aguirre, G., Bilbao, J., 2000. Pyrolysis of sawdust in a conical spouted bed reactor. Yields and product composition. Ind. Eng. Chem. Res. 39(6), 1925-1933.

[4] Aho, A., Kumar, N., Eranen, K., Salmi, T., Hupa, M., Murzin, D., 2007. Catalytic pyrolysis of biomass in a fluidized bed reactor: influence of the acidity of h-beta zeolite. Process Saf. Environ. Prot. 85(5), 473-480.

[5] Aho, A., Kumar, N., Eränen, K., Salmi, T., Hupa, M., Murzin, D.Y., 2008. Catalytic pyrolysis of woody biomass in a fluidized bed reactor: influence of the zeolite structure. Fuel. 87(12), 2493-2501.

[6] Bae, Y.J., Ryu, C., Jeon, J.K., Park, J., Suh, D.J., Suh, Y.W., Chang, D., Park, Y.K., 2011. The characteristics of bio-oil produced from the pyrolysis of three marine macroalgae. Bioresour. Technol. 102(3), 3512-3520.

[7] Bhatia, S., Beltramini, J., Do, D.D., 1989. Deactivation of zeolite catalysts. Catal. Rev. Sci. Eng. 31(4), 431-480.

[8] Bulushev, D.A., Ross, J.R.H., 2011. Catalysis for conversion of biomass to fuels via pyrolysis and gasification: a review. Catal. Today. 171(1), 1-13.

[9] Carlson, T.R., Tompsett, G.A., Conner, W.C., Huber, G.W., 2009. Aromatic production from catalytic fast pyrolysis of biomass-derived feedstocks. Top. Catal. 52(3), 241-252.

[10] Carlson, T.R., Vispute, T.P., Huber, G.W., 2008. Green gasoline by catalytic fast pyrolysis of solid biomass derived compounds. ChemSusChem. 1(5), 397-400.

[11] Chen, N.Y., Garwood, W.E., 1986. Industrial Application of Shape-Selective Catalysis. Catal. Rev. Sci. Eng. 28(2-3), 185-264.

[12] Chen, N.Y., Walsh, D.E., Koenig, L.R., 1988. Fluidized-Bed upgrading of wood pyrolysis liquids and related compounds, in: Soltes, J., Milne, T.A. (Eds.), Pyrolysis oils from biomass. American Chemical Society, Washington, DC, USA, pp. 277–289.

[13] Compton, D.L., Jackson, M.A., Mihalcik, D.J., Mullen, C.A., Boateng, A.A., 2011. Catalytic pyrolysis of oak via pyroprobe and bench scale, packed bed pyrolysis reactors. J. Anal. Appl. Pyrolysis. 90(2), 174-181.

[14] Corma, A., 1995. Inorganic solid acids and their use in acid-catalyzed hydrocarbon reactions. Chem. Rev. 95(3), 559-614.

[15] Costa, C., Dzikh, I. P., Lopes, J. M., Lemos, F., Ribeiro, F. R., 2000. Activity - acidity relationship in zeolite ZSM-5. Application of Bronsted-type equations. J. Mol. Catal. A: Chem. 154(1-2), 193-201.

[16] Dickerson, T., Soria, J., 2013. Catalytic Fast Pyrolysis: A Review. Energies. 6(1), 514-538.

[17] Diebold, J., Scahill, J., 1988. Biomass to gasoline (BTG): Upgrading pyrolysis vapors to aromatic gasoline with zeolite catalysts at atmospheric pressure. Preprints of 193^rd ACS Meeting, Div. Fuel Chemistry, Denver, CO April 5–10, 32(2), pp. 297–307.

[18] Dorrestijn, E., Kranenburg, M., Poinsot, D., Mulder, P., 1999. Lignin depolymerization in hydrogen-donor solvents. Holzforschung. 53(6), 611-616.

[19] Elliott, D.C., Hart, T.R., Neuenschwander, G.G., Rotness, L.J., Olarte, M.V., Zacher, A.H., Solantausta, Y., 2012. Catalytic hydroprocessing of fast pyrolysis bio-oil from pine sawdust. Energy Fuels. 26(6), 3891-3896.

[20] French, R., Czernik, S., 2010. Catalytic pyrolysis of biomass for biofuels production. Fuel Process. Technol. 91(1), 25-32.

[21] Gayubo, A.G., Aguayo, A.T., Atutxa, A., Valle, B., Bilbao, J., 2005. Undesired components in the transformation of biomass pyrolysis oil into hydrocarbons on an HZSM-5 zeolite catalyst. J. Chem. Technol. Biotechnol. 80(11), 1244-1251.

[22] Hassan, E.B., Steele, P.H., Ingram, L., 2009. Characterization of fast pyrolysis bio-oils produced from pretreated pine wood. Appl. Biochem. Biotechnol. 154(1), 3-13.

[23] Heo, S.G., Kim, Jeong, K.E., Jeon, J.K., Park, S.H., Kim, J.M., Kim, S.S., Park, Y.K., 2011. Catalytic upgrading of oil fractions separated from food waste leachate. Bioresour Technol. 102(4), 3952-3957.

[24] Iliopoulou, E.F., Antonakou, E.V., Karakoulia, S.A., Vasalos, I.A., Lappas, A.A., Triantafyllidis, K.S., 2007. Catalytic conversion of biomass pyrolysis products by mesoporous materials: effect of steam stability and acidity of Al-MCM-41 catalysts. Chem. Eng. J. 134(1-3), 51-57.

[25] Ingram, L., Mohan, D., Bricka, M., Steele, P., Strobel, D., Crocker, D., Mitchell, B., Mohammad, J., Cantrell, K., Pittman, C.U., 2008. Pyrolysis of wood and bark in an auger reactor: Physical Properties and Chemical Analysis of the Produced Bio-oils. Energy Fuels. 22(1), 614-625.

[26] Kasim, F.H., Saidina Amin, N.A., Daud, S., Saad, S.A., Salleh, M.N., 2007. Catalytic conversion of RBD palm oil to gasoline: the effect of silica-alumina ratio in HZSM5. Jurnal Teknologi. 47(F), 55-67.

[27] Lee, H.W., Jeon, J.K., Park, S.H., Jeong, K.E., Chae, H.J., Park, Y.K., 2011. Catalytic pyrolysis of Laminaria japonica over nanoporous catalysts using Py-GC/MS. Nanoscale Res. Lett. 6 , 500.

[28] Liu, C., Wang, H., Karim, A.M., Sun, J., Wang, Y., 2014. Catalytic fast pyrolysis of lignocellulosic biomass. Chem. Soc. Rev. 43(22), 7594-7623

[29] Lu, Q., Zhang, Z.F., Dong, C.Q., Zhu, X.F., 2010. Catalytic upgrading of biomass fast pyrolysis vapors with nano metal oxides: an analytical Py-GC/MS study. Energies. 3(11), 1805-1820.

[30] Lu, Q., Zhu, X., Li W., Zhang, Y., Chen, D.Y., 2009. On-line catalytic upgrading of biomass fast pyrolysis products. Chin. Sci. Bull. 54(11), 1941-1948.

[31] Meng, X., Xu, C.C., Gao, J., Liu, Z., 2008. Influence of feed properties and reaction conditions on catalytic pyrolysis of gas oils and heavy oils. Fuel. 87(12), 2463-2468.

[32] Mihalcik, D.J., Mullen, C.A., Boateng, A.A., 2011. Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components. J. Anal. Appl. Pyrolysis. 92(1), 224-232.

[33] Mohan, D., Pittman, C.U., Steele, P.H., 2006. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuels. 20(3), 848-889.

[34] Park, H.J., Dong, J.I., Jeon, J.K., Yoo, K.S., Yim, J.H., Sohn, J.M., Park, Y.K., 2007. Conversion of the pyrolytic vapor of radiata pine over zeolites. J. Ind. Eng. Chem. 13(2), 182-189.

[35] Park, H.J., Heo, H.S., Jeon, J.K., Kim, J., Ryoo, R., Jeong, K.E., Park, Y.K., 2010. Highly valuable chemicals production from catalytic upgrading of radiata pine sawdust-derived pyrolytic vapors over mesoporous MFI zeolites. Appl. Catal., B. 95(3-4), 365-373.

[36] Park, H.J., Park, Y.K., Kim, J.S., Jeon, J.K., Yoo, K.S., Yim, J.H., Jung, J., Sohn, J.M., 2006. Bio-oil upgrading over Ga modified zeolites in a bubbling fluidized bed reactor. Stud. Surf. Sci. Catal. 159, 553-556.

[37] Pütün, E., Uzun, B.B., Pütün, A.E., 2009. Rapid pyrolysis of olive residue. 2. Effect of catalytic upgrading of pyrolysis vapors in a two-stage fixed-bed reactor. Energy Fuels. 23(4), 2248-2258.

[38] Rabinovich, O.S., Borodulya, V.A., Vinogradov, L.M., Korban, V.V., 2010. Fast pyrolysis of an ensemble of biomass particles in a fluidized bed. J. Eng. Phys.Thermophys. 83(4), 742-752.